RODEO WHEELS FIT NP Gen 3?

[72yellow]

Folks
Have opportunity for set of Antera wheels of Holden Rodeo
Anyone know if safely fit NP / Gen 3?
PCD is same but not sure about the centre bore & offset?
Will dummy fit to Paj to test.

DB

[pampaskat]

The 46mm offset required by the Gen 3 is likely to be an issue. Even if the spigot and bolt holes are OK and you are able to physically mount the rims, you might find clearance issues at the front when steering (rear should work, though). When trial fitting it will be best if you have a tyre of the intended type and size fitted on the rim.