Gday OJ, FYI i just checked with King springs - your free heights for models are correct but the weights are not:
Front:
KCFR-55SP is 310mm @ 730lb (described as lighter duty special model for triton)
KCFR-55 is 315mm @ 750lb...
Grimo82
Member
Last Activity: 7 hours ago
Joined: 19-02-15
Location: Sth Coast NSW
-
my challenger is running a powder coated ECB Alloy bar: https://portal.ecb.com.au/products/28418
the triton a standard mitsubushi (GLXR) polished nudge bar...Leave a comment:
-
Yep my measurements are roughly an inch before the step down on each seat just because thats what aligns on the mounted strut that I can reach - so agree very close to the same.
I checked out my mates triton running ultimate struts (roughly...Leave a comment:
-
Yep have old strut and bottom bolt centre to top of bottom spring mount is roughly:
original: 222mm ish
In car (ultimate): maybe 225mm in similar position.
Can't jack at present but box they left old gear in has right part numbers....Leave a comment:
-
Ok so went with kcfr55-sp front and kcrr-23 in rear.
Noted weights were: 1170 front & 1035 rear kg.
Heights are now:
Front: 530mm
rear: 570
Seemingly i have lost height in front despite being...Last edited by Grimo82; 3 days ago.Leave a comment:
-
Hi lads, toyed the idea of swapping wheels but oldies challenger and mates triton reasonable milage and prob a fail in this blokes eyes I'd hazard.
Fyi all pics at start are tyres in question, not new ones! However I have purchased new...Leave a comment:
-
Update: thanks all for comments. OJ in respect to chart mine (previous tyres now) didn't even have what I would describe as cracking, no depth, raising or seperation at all - just looked like stress marks....
Anyway I reached out to Toyo...Leave a comment:
-
yep have reached out to them.
Interestingly just noticed the neighbour (Prado) has same tyres with 100K on them. Same issue but still going strong....Leave a comment:
-
45k km 3 yr old Toyo ATs failed @ rego
Toyo open country (opat2) ATs.
Hey all, these tyres (all 4) were recently failed on NSW rego check on account of casing damage. .
Assosor claims small waves between tread blocks constitutes splitting with imminent chance of...You do not have permission to view this gallery.
This gallery has 4 photos.Last edited by Grimo82; 2 weeks ago. -
Fyi Pedders just quoted me $900 to replace front strut alone (supply/install)!.... Or the same to replace full front/rear kit that I supply (+1400?)- seems nuts.Leave a comment:
-
....so might run kings progressive KCRS-23 (if tall enough - 40mm?) with Pedder's bump stops for the rear and a progressive and/or tapered past them once weighed....Leave a comment:
-
OK, spoke to Ultimate again, they appear like the front runner at the moment for less stuffing around (came down al little in price) and finding a decent alternate installer.
They did also note they are happy to use a lovells linear (suggested...Leave a comment:
-
further to this, a little more enquiring
supercheap will match sparesbox but 1 month delivery for special order via monroe!
the kyb scorched are for lifted rigs only as per their company website
oztech/kings package is...Last edited by Grimo82; 3 weeks ago.Leave a comment:
-
many thanks OJ - ive been reading through all your threads and comments - such a wealth of knowledge!! Ill check out the oztech, thanks for the lead.
FYI i spoke to pedders on the way into town today - their quote was $940 to replace front...Leave a comment:
-
Replacement PC shocks - Monroe, KYB, RAW, other ?? Any experience
Hi Guys, looking to swap put front shocks on my 14' PC with 80 clicks - rego check tells me front left is on the way out.
Its never done any offroad work (occasional firetail / national park etc) so looking for recomendations on which way...
No activity results to display
Leave a comment: