Below Nav Bar Ad Module



No announcement yet.

Search Result

19 results in 0.0086 seconds.
lift x



  • Bulldozer
    adjustable ride height
    by Bulldozer
    For the majority of the driving I do with my Gen3 Pajero, the stock suspension and tire size does just fine. But, occasionally on the weekends I go out into the mountains on some roads where extra ground clearance would be very helpful. So, I'd love...
    29-02-16, 02:09 PM
  • A Sweaty Pajero
    Flexy coils
    by A Sweaty Pajero
    Hey guys i am keen to get flexy coils for my pajero NJ 1995, could i put GQ patrol 2" flexy coils in the rear? would that lift it 4"? or does a company make flexy coils for the pajero? cheers guys.
    30-11-15, 10:08 AM
  • Connormcintosh
    2" lift springs with standard shocks?
    by Connormcintosh

    Pretty much as the title states, I am not a person with the deepest of pockets so I was thinking could I buy the Dobinson 2" lift Springs first then get them installed with the standard shocks and buy the Bilstein 2" lift...
    15-10-15, 05:59 PM
  • EnpePaj
    Lifted NP - WA review
    by EnpePaj
    Hi guys / gals,

    Just sharing an experience with anyone in Western Australia thinking about lifting their Paj.

    After being referred to Autoride in Balcatta I dropped by and was initially concerned about a business at the back...
    27-01-14, 01:06 PM
  • notjustapajero
    traction control lsd and difflockers lockers
    by notjustapajero
    Hey all just chasing some info on the gen 3 pajero as I have had mine for over a year now my ride currently has a custom made bullbar winch tube bar that I my self have made (picks in my album) have a look and swing me a pm if you like to know any info...
    30-04-13, 07:49 PM
  • pratel
    Generation 3/4 Pajero body lift
    by pratel
    Quite interesting body lift from Czech republic:
    05-11-12, 09:27 AM
  • wissam1986
    NP/NM with 6G72 engine? lift & headers
    by wissam1986
    I live in Qatar, and own a 3rd gen 2004 Pajero 3.0 Petrol (NP/NM)... My engine is the 6G72, which is usually found on the NH.

    I'm looking into a 2" lovell/ bilstein lift, but due to the weird combination of model/engine type, its become...
    07-10-12, 09:52 AM
  • Dans_85
    Need to lift rear leafs!
    by Dans_85
    Hi all, I'm new here

    Sorry if this has already been covered or whatnot, i am just after some basic knowledge and advice.

    I have a 1985 SWB (Leaf sprung) and the back is slightly lower than the front, my leafs look quite...
    26-09-12, 05:47 PM
  • mr_munro
    Got the lift into my NS, Bilstein/Lovells
    by mr_munro
    Just a few pics to show some before and afters and to say thanks to Keiron for his advice.
    The front of my pajero was the main reason I needed to upgrade the springs/shocks, after the bullbar/winch/2nd batt it was really drooping in the front....
    05-03-12, 05:31 PM
  • jonesywagga
    suspension upgrade
    by jonesywagga
    Gday all, was looking for recommendations on replacing my rear suspension, NB with leaf springs, I would like to buy Australian made ones if you still can, ERS have the best warranty, I want to lift the back up to match the front. Is it wise to mix and...
    20-02-12, 10:05 AM
  • speedwave
    Pajero NS 2008 Suspension Lift Experience
    by speedwave
    I am starting this thread to help anyone that owns a Pajero NS 2008 that is deciding to upgrade the stock suspension and go for a lift kit. I have gone through allot of research and decided to go for the "SD Lovell raised springs" and "Lovell...
    19-12-11, 04:59 AM
  • Reduced_Oxygen
    Need help Raising bumpers after 2inch lift
    by Reduced_Oxygen
    i have a 1994 swb NJ GLS any ideas?
    08-02-11, 08:46 PM
  • mr.donkeykong
    aftermarket suspension question
    by mr.donkeykong
    Hi, this may seem like a stupid question to some of you but will a suspension upgrade on the pajero affect the vehicles factory fitted driving aids in any way (ie. traction control, stability control). Also, is there anything else that I should know...
    02-01-11, 09:59 AM
  • bazzer87
    Coil Spacers?
    by bazzer87
    In my 98 NL i have already put in a 45mm IronMan Lift consisting of taller springs, longer shocks and heavy duty torsion bars.
    i am about to put in a set of airbags in the rear and thought while i had the coils off again i might put some coil spacers...
    13-12-10, 09:15 PM
  • outback_aussie
    Rules about some Mod's to Pajero NM?
    by outback_aussie

    I'm a newbie to the forum - and have a few questions about some things I'd like to do on my Pajero (NM, 2002, V6, GLX) and if there are any issues with doing so;

    1. Can you lift the height by over 2 inches / 50mm...
    22-11-10, 02:42 PM
  • Pajmobile
    Mad about it
    by Pajmobile
    Hello all, my name is Dom. 4w driving is new to me but i've been hooked since the first time i went out. I have an 85 lwb pajero wagon and i've only just started using it as a 4wd and i want to make some upgrades, mainly lifting it but unsure of my...
    03-09-10, 12:03 AM
  • johnsonsabroad
    Lovell SD or HD - what to go for?
    by johnsonsabroad
    I have made up my mind to go for the Lovell / Bilstein combo but want make sure I order the springs best suited to my situation. When travelling I pull a camper max 900kg/110kg on ball, and will be looking to do the outback/desert trip next year. There...
    16-04-10, 09:10 AM
  • Parko
    NP lift in Melbourne
    by Parko
    Hi all
    New to the forum and have just purchased a 05 NP Glx (Deisel), currently it is just the standard setup, but I am looking to put on bull bar, winch, snorkel, lights and also lift the suspension. I have been to a few places and they all say...
    21-11-09, 10:00 PM
  • riaandup
    2004 Pajero NP suspension lift
    by riaandup

    I have just joined the forum, but have been reading many of your articles since i bought my mitsu 10 months ago... I have fitted a ARB winch bar, ARB onboard compressor, Uniden UHF, Cooper ST, Magellen Crossover and a Safari snorkel......
    19-08-08, 07:43 PM